Huile de noix de coco export Asie

Nous sommes un exportateur direct depuis des années de RDB et d’huile hydrogénée de coco . Nous offrons deux produits de qualité destinés à l'industrie.

Controle SGS à la charge du client. Livraisons fiables et garanties toutes destinations
Règlement par LC.

RBD de noix de coco

(Rappel RDB = raffinée, décolorée et désodorisée)

Specs (as MEOMA) :
Free Fatty Acids (as lauric) 0.1%max
Moisture & Impurities 0.1%max
Iodine Value (WIJS) 7.5-10,5
Colour (5.25” lovibond cell) 1.5Red Max

Huile hydrogénée de noix de coco

Specs :
Free Fatty Acid (as lauric) 0.1%max
Moisture & Impurities 0.1%max
Iodine Value (WIJS) 3%max
Melting Point 30-33deg C
Colour (5.25” lovibond cell) 1 Red Max

RBD Palm Oil will be semi solid/solid at temperatures below 33deg C.
RBD Coconut Oil will be semi solid/solid below 22deg C.
Therefore, the state of the product whether solid/semi solid/liquid will depend very much on the surrounding temperature.

Conditionnement

En fûts d’acier neufs de 190kg; 18.62 MT par FCL de 20’.
En FlexiTanks de 20 tonnes environ.

Information FlexiTank

For flexi tank packaging, please see the picture below which is self explanatory. It is one piece of about 20MT depending on the density of the product. From the picture, you will notice that the oil will have to be pumped out from the tank at the factory. The bags are disposable, therefore if the product is semi solid, you can also cut the bags to scoop out the products

Container / FlexiTanks arrive in a kit, ready for assembly. The outside box will become the bulkhead.
The Container / FlexiTank is fitted into the container.
If required, a Container / FlexiTank Heater Pads are installed.
The Container / FlexiTank is assembled and filled with product.
With the Cortainer / ITW patented bulkhead in place, the load is complete. The container is ready for shipping.
The CONTAINER / ITW Flexitank all-metal load / discharge and air vent fittings are the standard for the industry, avoiding the unreliability associated with the widely used plastic heat-sealed fittings. Together with the double-skin thick-wall design, this makes the CONTAINER / ITW Flexitank the most reliable ever.
This is a Container FlexiTank filled with air to demonstrate its size. The Fill/Discharge hose is the short one on the right and the center vent valve is the long one in the middle.